|
Cold-Air Intake for:
2001.5-2005 Volkswagen Passat 1.8T
2002-2005 Audi A4 1.8T
Comes with a red silicone coupler
Made from 6061-T6 aluminum
Crafted with mandrel bends and TIG welds
Increases throttle response
Has been dyno tested to show HP/TQ gains to the wheels
Easy to install, bolt-on system with no factory alterations
Should be used in dry-weather conditions only*
|
 |
Sale Price: $215.00
Orig. Price: $269.00
Part#: 010102-CAI
Availability: In Stock
|
|
Cold-Air Intake for:
2002-2005 Audi A4 3.0
2004-2005 Audi S4 4.2
Comes with a red silicone coupler
Made from 6061-T6 aluminum
Crafted with mandrel bends and TIG welds
Increases throttle response
Has been dyno tested to show HP/TQ gains to the wheels
Easy to install, bolt-on system with no factory alterations
Should be used in dry-weather conditions only*
|
|
Blowout Price: $169.00
Sale Price: $199.00
Orig. Price: $249.00
Part#: 010202-CAI
Availability: In Stock
|
|
Intercooler Core
Dims: 24.5" wide x 10.5" tall x 2.25" deep
Inlet / Outlet sizes: 2" O.D.
Can be used with a boost range of 10psi - 25psi
All cores are pressure tested for leaks
Core only. Mounting hardware not included.
Silicone hoses are available separately (Part# 990102 below)
Dyno results from '02 Audi A4 1.8T: Run 1 - Cold vs. Run 5 - Hot
|
|
Blowout Price: $309.00
Sale Price: $359.00
Orig. Price: $449.00
Part#: 990101
Availability: In Stock
|
|
Silicone Hoses
Both hoses have a 2" I.D.
Comes with 2 hoses and 6 hose clamps
Clamps have protective lining so they won't cut into silicone
Pressure tested with a burst rate of 110 psi
|
|
Blowout Price: $59.00
Sale Price: $79.00
Orig. Price: $99.00
Part#: 990102
Availability: In Stock
|
|
Air Filter
Dims: 3" mount x 5.75" base x 5.25" top x 6.75" tall
Cotton filter w/ very light oil
|
|
Sale Price: $28.00
Orig. Price: $35.00
Part#: 990201
Availability: In Stock
|
|
Air Filter
Dims: 1.5" mount x 2.5" base x 2" top x 1.5" tall
Cotton filter w/ very light oil
|
|
Sale Price: $16.00
Orig. Price: $20.00
Part#: 990202
Availability: In Stock
|
|
*Our cold-air intakes are designed for dry weather conditions only and should not be used in any wet
climates or on any wet roads or highways. Failure to comply with this warning may cause water to be absorbed into the
engine through the filter, causing serious damage to your motor. Boosted Technology, Inc. assumes no liability
for damages to your motor due to water entering your engine through our cold-air intakes.
|
|
