No hood modification necessary!
Custom intake manifold included
Safe, reliable, affordable, ‘plug and play’
Low boost, instant boost, no lag
Easy 4-6 hours typical install
*4-7 pounds boost on the stock 4.0L
Works and has been tested at all altitudes
Utilizes a modified GM 3.8L Eaton M90 supercharger
Rotor pack and nose drive are easily rebuildable
Retains A/C! No relocation of any engine components, uses stock tensioner pulley
Will work for ‘strokers’ 4.5+L engines, but expect lower boost, +20-25% increase power
Fully compatible with all bolt-ons, 62-70mmTB, cat back exhaust, 703/784 injectors, roller rockers, even cam and ported big valve heads
Completely stock EFI settings and function when not in boost
7th injector, 60lbs/hr, provides additional fuel under boost and liquid intercooling effect
Split Second FTC controls boost timing retard and auxiliary 7th injector control
FTC is fully laptop programmable
FTC comes with base tune pre-loaded
FTC is legal only for racing vehicles which may never be used upon a highway
* altitude dependent. unit comes with standard pulley, higher boost pulleys can be purchased under accessories.
We are pleased to offer our new “2016” type Supercharger Systems for the Jeep 4.0. Our XJ systems fit 1991 to 2001 Cherokees. Five million 4.0 engines have been manufactured. It is a perfect candidate for a supercharger system like ours.
We use re-purposed Eaton Gen IV M90 superchargers. These were used by General Motors on the 3.8 Liter V6 engines from the late 90’s to early 2000’s. It is a true “original equipment” supercharger that has factory engineering and testing and will work in any climate. Hundreds of thousands of Eaton M90 supercharged vehicles were sold. Eaton still sells later version of this supercharger on today’s performance vehicles.
We begin by disassembling the supercharger unit. Then we inspect, clean, and replace all necessary parts. We always replace the front bearing, coupler, and seal. This is an easily-serviced unit, not a complicated high-priced after-market supercharger. It will tolerate hard service. It will not self-destruct if a piece of dirt larger than .003″ enters it. It will not seize up if the temperature drops below -20 F. It is the perfect unit for the Jeep after-market.
Our Chief Design Engineer has been involved in the design of most of the current Jeep supercharger systems on the market. This gives us the knowledge of what works and what doesn’t. This cumulative knowledge and experience gives our customers the best Jeep 4.0 system made. We use CNC-machined 6061 Aluminum for our major components. Our design consists of a five bolt supercharger-to-manifold adapter (for the Top Mount kit), or our custom intake manifold (for the Side Mount kit) and a .5″ thick supercharger nose support for additional rigidity and strength. This attaches to the front of the power steering pump using the three bolts Jeep uses to secure the pump. Also used is the brace that ties the pump to the side of the engine. Our idler pulley arrangement gives us over 270 degrees of belt wrap on both the power steering pump and the supercharger (important if you have big tires).
Our systems are easy to install.
Top Mount: No manifold changes. Simply, remove the throttle body and build up from there, one piece at a time. Removing the throttle body is as deep as you go into the engine.
Side Mount: Install our intake manifold, and build out from there, one piece at a time. Removing the intake manifold is as deep as you go into the engine.
Our fuel system is a ‘plug-and-play’ setup as well. We use a 7th fuel injector to achieve fuel enrichment. The fuel enters the supercharger and is immediately vaporized. This provides good fuel distribution and more importantly, it dramatically cools the discharge temperature. We have seen 40 to 50 degree F drops. This allows us to add power, safely.
We work directly with Split Second Tuning to manufacture our tuners. We designed and manufacture the key plastic parts to allow a true ‘plug and play’ tuner install. Both Split Second and Boosted Technologies have spend hundreds of hours developing this process. Our components read both the inlet and discharge pressures in the manifold so we can accurately add fuel and adjust timing to your jeep engine. We do not adjust the factory tables while your engine is not under boost. Chrysler knows what they are doing. We only make changes when boost is added.
The factory plastic pipe that connects the air box to the throttle body is restrictive. It was designed for low speed torque, but is no longer necessary with the torque that the supercharger adds. Our stock kits come with Green Filter elements that attach near the supercharger. We also optionally supply an aluminum alloy 2.5″ pipe that allows unrestricted access to your factory air box.
A tremendous increase in torque at low RPMs, great driveability, the ability to cruise at highway speeds in higher gears, the ability to actually pass vehicles you never could before, ease of installation, no permanent modification to major components, ability to quickly return the vehicle to stock, ability to easily transfer the system to another Cherokee, plus one of the best warranties in the supercharger business!
WARRANTY: Unless otherwise stated on the invoice, Boosted Technologies parts are warranted for a period of 12 months from the original purchase date shown on the invoice. A copy of the original dated invoice must accompany any part that is returned because of a warranty claim. During the warranty period, Boosted Technologies will repair or replace, at its discretion, any product found to be defective in material or workmanship. It is the customer’s responsibility to obtain an RMA number from Boosted Technologies before returning any product. The customer is responsible for the return shipping costs to us, and the cost of return shipping to the customer will be covered by Boosted Technologies if the the problem is determined to be a warranty issue.
In the event of a possible defect in material or workmanship, the responsibility of Boosted Technologies is strictly limited to the repair or replacement of the defective component.
Boosted Technologies products are designed to work on stock, unmodified vehicles, as supplied by the original manufacturer. Due to the complexity and variety of modifications possible, Boosted Technologies makes no claims as to the merchantability or fitness of any part. Rather, it is up to the purchaser to determine if the part is compatible with his/her application.
WARNING: Please take extra care to familiarize yourself following installation, as this supercharger will result in a significant change to the performance characteristics of your vehicle. Boosted Technologies is not responsible for improper installation, incidental and consequential damages, property damage, personal injury damages, labor costs, transportation or other incidental or consequential charges; or storage or rental-car charges, to the extent permitted by law in any installation or use of this product.
RETURN POLICY: All sales are final.
When you look at the dyno charts, if you look for peak numbers alone, you are cheating yourself. The peak numbers only occur in a small time window, at exact RPMs. What really matters is the difference in HP and Torque over the RPM range. That is what you feel when you drive. Think about it this way: Would you rather have 50 more HP for a split second, or would you rather have 50 HP throughout most of your RPM range? Just keep that in mind when comparing dyno numbers, so you make an informed decision. If you would like any further explanation or have any questions, just let us know!
1998 Wrangler 4.0 (5,280 feet) Standard, Medium, High Boost Pulleys
1998 Wrangler 4.0 (6,200 feet) 7 lb pulley at 6,200 feet